Note
• If you want to set other than WEP key1, click Advanced.
• If you do not know the Authentication or Encryption settings for network, contact your network
administrator.
q
Click Next. The settings will be sent to your printer. The settings will remain unchanged if you click
Cancel.
Note
• If you want to manually enter the IP address settings of your printer, click Change IP Address and enter
the necessary IP address settings for your network. After making your selection, click Next and the Wizard
will search for available wireless networks.
• The control panel settings will be automatically changed to WLAN when the wireless settings are sent to
your printer.
r
Follow the on-screen instructions.
For the users connected with a network cable for configuration:
Disconnect the network cable between your access point (hub or router) and the printer, and click
Next.
Wireless configuration for Windows
®
using the Brother automatic installer application
4
45