Brother HL-4040CN Network User's Manual page 86

Note
• If the list is blank, check if the printer is within range for wireless communication. Then, click Refresh.
• If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add
button. Follow the on-screen instructions for entering the Name (SSID) and the Channel number.
n
If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to q.
o
If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless printer, you must ensure that it is configured to match the
Authentication and Encryption settings of your existing wireless network. Choose the
Wireless configuration for Macintosh
®
using the Brother automatic installer application
5
79