Set Button; (Up) Or (Down) Button - Brother HL-2400C Series User Manual

Notes
When you press the Sel button, remember the following:

All other buttons—except the Sel button—are operational only when
the printer is off-line.

If the printer is not in AUTO emulation mode, the LCD displays the
current emulation by pressing the Sel button to take it off-line, but
you cannot enter other emulation modes. To make settings in other
emulation modes, press the Emulation button and select the
emulation.

The Sel button works as a "quick exit" button. If you are lost in the
display menus or you want to quickly exit the display menu, press the
Sel button. You can exit quickly from any depth of the display menu
to the on-line ready state. If you have already made a setting effective
by pressing the Set button and then press the Sel button to quickly
exit, your setting (whether made by accident or on purpose) will
remain effective. Pressing the Sel button will not cancel any setting.

SET Button

Pressing the Set button allows you to select certain items on the display
or make the displayed menu or setting effective. The button also works as
an execute button to perform the displayed function.
When you press the Set button, the printer stores the settings you have
selected into the memory as "User Settings." Every time you turn on the
printer, it is reset according to these user settings. They remain effective
until you make new settings or restore them to the factory settings. For
factory reset, see "RESET Button" in this chapter.
Note
When you press the Set button to select a setting, an asterisk appears at
the end of display for a short time. Since the asterisk indicates the
selection, you can easily find the current setting when you scroll through
the display.
(UP) or (DOWN) Button
Pressing
forward or backward respectively on the display. Press or keep pressing
the button until you access the desired item.
(UP) or (DOWN) button scrolls the menus and settings
CHAPTER 4 CONTROL PANEL
4–7