3.2
Operation of Normal Mode
Normal Mode displays on the control panel the operational status of the printer when in
the "ONLINE" state and the necessary information for the operator to implement ordinary
maintenance work.
Operation Procedures
1) Press the power button to turn on the printer while holding down the Mode, Set and
buttons. Refer to Fig.5-1.
2) Press the On Line button so that the printer is on-line and the Ready LED starts to
flash.
3) The Ready LED lights approximately 250 seconds after power-on and the printer is
ready to print.
Normal Mode
See Table 5-2 for details of indications available in normal mode.
V-13