Buttons In Normal Mode; Sel Button - Brother HL-2400C Series User Manual

USER'S GUIDE

BUTTONS IN NORMAL MODE

SEL Button

4–6
You can control the basic printer operations and change various printer
settings in the NORMAL mode. Functions available in the NORMAL
mode are shown above the panel buttons.
Emulation Mode
Ready
Alarm
Mode
Continue
Fig. 4-3 Buttons in NORMAL Mode
Note
The factory settings are printed in bold in this section.
Pressing the Sel button changes the state of the printer between on-line
and off-line. When the printer is on-line, the On Line LED lights and the
printer is ready to receive data from the computer. When the printer is
off-line, the On Line LED is off.
To receive data from the computer, set the printer on-line. To operate the
control panel buttons, set the printer off-line.
When you press the Sel button when the printer is the on-line state, it
turns off-line and the LCD displays the current emulation.
You can enter other emulations in the
pressing the (UP) or
Copy Pages Orientation Feeder
Toner K C M Y
On Line Data
Sel Form Feed
Font
Set
AUTO
emulation mode by
(DOWN) button.