Assembly And Installation; Operation - Power Fist 8063927 User Manual

V4.0
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the contents are included.
Contents:
• Multiplier Head
• Handle
ASSEMBLY & INSTALLATION
1. Exchange the handle by pushing the recessed pop-up button on the
multiplier head.
2. Pull the handle out. Insert the new handle.
3. Align the pop-up button with the opening on the multiplier head.

OPERATION

Calculate the amount of output torque being applied by multiplying the input
torque by 3.3. An input of 10 ft-lb equal an output of 33 ft-lb.
1. Check that the torque multiplier handle is secure.
2. Push the drive socket onto the torque multiplier's 3/4 in. drive square.
3. Place the socket over the nut or bolt to be loosened.
4. Insert the ratchet wrench's 1/2 in. drive square into the multiplier's
drive socket.
5. Pull the ratchet wrench towards you while keeping the multiplier stationary.
The multiplier drive square rotates once for every four complete rotations
of the ratchet square.
6. Remove the ratchet wrench and the torque multiplier once the bolt or nut
is loose.
Visit www.princessauto.com for more information
Torque Multiplier 8063927
5