Assembly And Installation - Power Fist 8623159 User Manual

V 4.0
8. If any parts become damaged, broken, or misplaced, do not use the tool
until replacement parts have been obtained.
9. The workpiece may be sharp. After bending or cutting workpieces, use
caution. Be aware of sharp edges or sharp shreds of metal that may be
created. Use heavy gloves when handling the workpiece.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
ASSEMBLY & INSTALLATION
When this manual refers to a part number, it refers to the included Parts List.
1. Secure the tool to a workbench a stand.
2. For portability, the tool may also be clamped into the jaws of a vise.
3. The more rigidly the tool is secure, the easier it is to be used.
4. Four holes, predrilled and tapped into the base, accept M10 bolts
(sold separately).
USING THE SHRINKER AND STRETCHER
For hot rodders and restorers, fabricating body parts in the home shop is often
the only way to go. With good planning, you can reproduce shapes to match
original contours, or design shapes limited only by the imagination.
For an example, replacement headlight assembly mounting flanges can be
made. Most older cars tend to catch and hold moisture, thus rusting out.
Usually so much metal is gone that there is left to rescue. A new, fabricated
part is the only way to go.
Visit www.princessauto.com for more information
Metal Shrinker and Stretcher 8623159
5