Transmission Verification (Xmit) Report; Activity Report Interval - Brother MFC 4300 Owner's Manual

Transmission Verification (Xmit) Report

You can use the Xmit Report as proof that you sent a fax. This report lists the
time and date of transmission and whether the transmission was successful.
When the feature is OFF, the report is printed automatically only if there's an
Note
error during transmission. If the report indicates NG, send the document again.
If the report indicates you should check the readability of certain pages, resend
those pages.
When the feature is ON, the report is printed with every fax you send.
1
Press Function, 1, 7, 1.
2
Press or
3
Press Stop to exit.

Activity Report Interval

You can set the MFC to print activity reports at specific intervals (6, 12, 24
hours, 2, 4 or 7 days). If you set the interval to OFF, you can print the report by
following the steps in the previous section.
1
Press Function, 1, 7, 2.
2
Press or
and then press Set.
3
Press or
(If you choose 7 days, the LCD prompts you to choose the day of the week that
the 7-day countdown begins.
4
Enter the time to begin printing, in 24-hour format, and then press Set.
(For example, enter 19:45 for 7:45 PM).
5
Press Stop to exit.
9 - 2
P R I N T I N G R E P O R T S
to select ON or OFF, and then press Set.
to display INTERVAL?,
to choose an interval, and then press Set.
INTERVAL?