Table of Contents
Advertisement
Contrast
If your original is very light or very dark, you might want to set the contrast
accordingly. Use S.LIGHT to send a very light original. Use S.DARK to send a
very dark original.
1
Place the original face down in the ADF.
2
Press Function, 1, 3, 3.
3
Press
or
4
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu —OR— Press 2 if you are finished choosing settings, and then go
to Step 5.
5
Enter a fax number and press Start to send a fax.
Resolution
When you have an original in the ADF, you can use the Resolution key to change
the default setting. Press Resolution continuously until you see the lights change
to the setting you want. For Standard, turn Fine and S. Fine lights off. For Photo,
turn them both on. (See
Standard—Good for most typed documents.
Fine—Good for small print; transmits a little slower than standard resolution.
S.Fine (Super Fine)—Good for small print or artwork; transmits slower than
Photo— Use for documents with varying shades of gray; slowest transmission time.
Advanced Sending Operations
Overseas Mode
After you send a fax using this feature, the feature turns itself off.
1
Place the original face down in the ADF.
2
Press Function, 1, 3, 5.
3
Press
or
then press Set.
4
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings, and then go
to Step 5.
5
Enter the fax number you're calling.
6
Press Start.
6 - 7
S E T U P S E N D
to select AUTO, S.LIGHT or S.DARK, and then press Set.
Multiple Resolution Transmission
fine resolution .
to select ON (or OFF), and
, page 6-9.)
5.OVERSEAS MODE
Advertisement
Table of Contents
