Registering Your Distinctive Ring Pattern - Brother MFC 4300 Owner's Manual

Registering Your Distinctive Ring Pattern

If you are not sure which ring pattern you have call your telephone company.
Then assign your ring pattern in the steps below.
1
Set the MFC to MANUAL mode.
2
Press Function, 1, 0, 1. The LCD shows the current setting of this feature.
3
Press or to select DISTINCTIVE: SET? and press Set.
4
Press or to select the prestored ring pattern you want to assign, and then
press Set. (You will hear each pattern as you scroll through the four patterns.)
Be sure to choose the pattern assigned by the Telephone Company.
Ring
Pattern
1
2
3
4
5
Press Stop to exit.
Once you've registered the Distinctive Ring pattern in your MFC, you can turn
this feature on or off. To change the setting, follow Steps 1 to 4 above, selecting
ON (or OFF).
Rings
long - long
short - long - short
short - short - long
very long (normal pattern)
S E T U P R E C E I V E
5 - 10