Printer Configuration; Other Configuration; Printer Setup Category; Direct Access Category - Brother MFC 4300 Owner's Manual

Printer Configuration

Item
Continue Mode
Parallel
Bi-directional

Other Configuration

Item
Auto LF
Auto CR
Auto Wrap
Auto Skip

Printer Setup Category

File
Send settings
Load settings
Save settings
Save a command
Load Default
Quit

Direct Access Category

Item
Print Form
Reset Printer
Default What This Item Does
Manual Selects Auto or Manual on Auto error
recovery mode.
Enable Selects the bi-directional parallel "Enable"
or "Disable."
Default What This Item Does
Off Selects Auto LF "On or Off"
Off Selects Auto CR "On or Off"
Off Selects Auto Wrap "On or Off"
On Selects Auto Skip "On or Off"
Function
Sends the settings made within the RPC to
your MFC.
Loads the settings you stored in your
CD-ROM or hard disk to the RPC.
Saves the RPC settings to your CD-ROM or
hard disk.
Saves the RPC settings to your CD-ROM or
hard disk as a printer command string.
Loads the default settings to RPC.
Exits.
Function
Prints the MFC's character/symbol sets
"CHARASET.PRN" or any print files you have made.
Resets the MFC. The data remaining in the MFC and
the printer settings will be cleared.
F O R D O S U S E R S
12 - 6