Table of Contents
Advertisement
Installing the Remote Printer Console
Before you install the program, make sure you have the following hardware and
software required to install the program:
DOS
Version 3.3 or later
(You must be runnning under a pure DOS
environment. The Remote Printer Console will not
work in DOS emulation mode.)
Monitor
EGA/VGA or compatible
Option
Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
Follow these steps to install the Remote Printer Console program:
1
Make sure your Brother machine is connected to your computer and that it is
Online.
2
Start your computer and go to the DOS prompt. If you are in Windows
and return to the DOS prompt.
3
Insert the Brother CD-ROM into your CD-ROM drive.
4
At the DOS prompt (C:\>) type x: (Substitute the drive letter of your CD-ROM
drive for "x") and press Enter.
C:\>x:
5
Type CD RPCX and press Enter.
x:\>CD RPCX
6
Type RPCSETUP and press Enter.
x:\RPCX>RPCSETUP
7
Follow the instructions of the installer.
F O R D O S U S E R S
®
, exit
12 - 2
Advertisement
Table of Contents
