Table of Contents
Advertisement
ERROR MESSAGE
NOT REGISTERED You tried to access a One
PLS OPEN COVER
PRINT OVERRUN
(May occur when the
MFC is used as a
printer.)
PRINTER JAM
15 - 4
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
CAUSE
Touch or Speed Dial
number that is not
programmed.
A page, piece of paper or
paper clip, etc. may be
jammed inside the
MFC.
The available Ram has
been exceeded.
The paper is jammed in
the MFC.
ACTION
Set up the One Touch or
Speed Dial number.
See pages 7-1 to 7-2.
Open the top cover. If you
see any jammed paper or
other item, gently pull it
out, then close the scanner
unit. If the error message
remains, open and close
the top cover again. If the
MFC cannot reset itself
and return to the date and
time prompt, it will
display MACHINE
ERROR XX. Please call
Brother Customer Service
and tell them the Machine
Error number, at:
In USA:
1-800-284-4329
In Canada:
1-800-853-6660
In Montreal:
1-514-685-6464
Unplug the MFC and plug
it back in. Data remaining
in the memory of the MFC
will be deleted.
• If you have installed
®
the Windows
printer
driver, try again after
setting the TrueType
mode to "Print as
Graphics" in the
PRINT menu of your
application software.
• If this does not clear
the error, reduce the
complexity of your
document or reduce
the print resolution.
Do not pull the paper out
until you see pages 15-6
to 15-7.
Advertisement
Table of Contents
