Setting The Station Id - Brother MFC-890 User Manual

Setting the Station ID

You should store your name or company name and fax and
telephone number to be printed on all fax pages that you send.
1
Menu/Set
Press
2
Enter your fax number (up to 20
digits).
Menu/Set
Press
You must enter a fax number to continue (up to 20 digits).
3
Enter your telephone number (up to
20 digits).
Menu/Set
Press
(If your telephone number and fax number are the same, enter
the same number again.)
The telephone number you enter is only used for Cover Page
features. (See Composing the electronic Cover Page on page
6-14.)
4
Use the dial pad to enter your name
(up to 20 characters).
Menu/Set
Press
(See Entering text on page 4-4.)
5
Stop/Exit
Press
The LCD will show the date and time.
If the Station ID has already been programmed, the LCD will ask
you to press
1 3
, , .
.
.
.
.
1
to make a change or
GENERAL SETUP
3.STATION ID
STATION ID
FAX:
STATION ID
TEL:
STATION ID
NAME:
2
to exit without changing.
INITIAL SETUP 4 - 3