Table of Contents
Advertisement
Sending Faxes
Difficulty
Cannot send a fax
Transmission Verification Report
says 'Result:NG' or
'Result:ERROR'.
Poor fax send quality.
Vertical black lines when sending.
Handling Incoming Calls
Difficulty
The machine 'Hears' a voice as a
CNG Tone.
Sending a fax call to the machine.
Custom features on a single line.
Suggestions
Check all line cord connections.
Make sure that the Fax
mode on page 28.)
Ask the other party to check that the receiving machine has paper.
Print the Transmission Verification Report and check for an error. (See
Reports on page 66.)
Make sure the panel cover is completely closed.
There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and get 'Result:NG' on the Transmission
Verification Report, your machine may be out of memory. If the problem continues,
ask the telephone company to check your phone line.
If you often get transmission errors due to possible interference on the phone line,
try changing the menu setting of Compatibility to Basic. (See Phone line
interference on page 101.)
Try changing your resolution to Fine or S.Fine. Make a copy to check your
machine's scanner operation. If the copy quality is not good, clean the scanner.
(See Cleaning the scanner on page 105.)
If the copy you made shows the same problem, clean the scanner. (See Cleaning
the scanner on page 105.)
Suggestions
If Easy Receive is set to on, your machine is more sensitive to sounds. It may
mistakenly interpret certain voices or music on the line as a fax machine calling
and respond with fax receiving tones. Deactivate the machine by pressing
Stop/Exit. Try avoiding this problem by turning Easy Receive to off. (See Easy
Receive on page 37.)
If you answered at the machine, press Black Start and hang up at once. If you
answered on an external or extension phone, press your Fax Receive Code
l
(default setting is
51). When your machine answers, hang up.
If you have Call Waiting, Call Waiting/Caller ID, Voice Mail, an alarm system or
other custom feature on a single phone line with your machine, it may create a
problem sending or receiving faxes.
For example: If you subscribe to Call Waiting or some other custom service and
its signal comes through the line while your machine is sending or receiving a fax,
the signal can temporarily interrupt or disrupt the faxes. Brother's ECM feature
should help overcome this problem. This condition is related to the telephone
system industry and is common to all devices that send and receive information
on a single, shared line with custom features. If avoiding a slight interruption is
crucial to your business, a separate phone line with no custom features is
recommended.
Troubleshooting and Routine Maintenance
key is illuminated. (See Entering Fax
93
Advertisement
Table of Contents
