Changing copy quality
You can choose from a range of quality
settings. The default setting is Normal.
To temporarily change the quality setting,
follow the instructions below:
Normal is the recommended mode
Normal
for ordinary printouts. This
produces good copy quality with
good copy speed.
Fast copy speed and lowest ink
Fast
consumption. Use to save time
printing documents to be proof-
read, large documents, or many
copies.
Use best mode to copy precise
Best
images such as photographs. This
provides the highest resolution
and the slowest speed.
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Do one of the following:
(MFC-3360C)
Press Quality.
(FAX-1860C and FAX-1960C)
Press Copy Options and a or b to
choose Quality.
Press OK.
e
Press a or b to choose Normal, Fast
or Best.
Press OK.
f
Press Black Start or Color Start.
To change the default setting, follow the
13
instructions below:
a
Press Menu, 3, 1.
1.Quality
b
Press a or b to choose Normal, Fast
or Best.
Press OK.
c
Press Stop/Exit.
Enlarging or reducing the
image copied
You can select the following enlargement or
reduction ratios:
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
Press
.
or
and a or b to
choose
Enlarge/Reduce
To enlarge or reduce the next copy follow the
instructions below:
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Options or Copy Options and
a or b to choose Enlarge/Reduce.
Press OK.
Making copies
Custom(25-400%)
200%
198% 4"x6"iA4
186% 4"x6"iLTR
142% A5iA4
104% EXEiLTR
100%
97% LTRiA4
93% A4iLTR
83% LGLiA4
78% LGLiLTR
69% A4iA5
50%
71
13
13
.