Table of Contents
Advertisement
Sending a fax manually
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
a
Make sure you are in Fax mode
b
Load your document.
c
To listen for a dial tone do one of the
following:
(MFC-3360C and FAX-1860C)
Press Hook/Hold or pick up the
handset.
(FAX-1960C)
Press Speaker Phone on the
machine.
d
Dial using the machine's dial pad.
e
When you hear the fax tone, press
Black Start or Color Start.
f
If you picked up machine's handset
replace it.
Sending a fax at the end of a
conversation
(MFC-3360C and FAX-1860C only)
At the end of a conversation you can send a
fax to the other party before you both hang up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Make sure you are in Fax mode
c
Load your document.
d
Press Black Start and Color Start.
e
If you picked up the handset replace it.
Out of Memory message
5
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
.
while scanning a subsequent page, you will
have the option to press Black Start to send
the pages scanned so far, or to press
Stop/Exit to cancel the operation.
Note
If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 31.)
5
.
Sending a fax
5
5
33
Advertisement
Table of Contents
