Table of Contents
Advertisement
Tone or pulse (Canada only)
If you have a Pulse dialing service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below:
a
Do one of the following:
(MFC-3360C and FAX-1860C)
Pick up the handset.
(FAX-1960C)
Pick up the cordless handset and
press
Speaker Phone on the machine.
b
Press # on the machine's control panel.
Any digits dialed after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialing service.
Fax/Tel mode when the power
key is on
When the machine is in Fax/Tel mode, it will
use the F/T Ring Time (pseudo/double-
ringing) to alert you to pick up a voice call.
Do one of the following:
(MFC-3360C and FAX-1860C)
If you are at the machine you can lift the
handset to answer.
(FAX-1960C)
You can press
cordless handset or press
Speaker Phone on the machine.
If you are at an extension phone, you'll
need to lift the handset during the F/T Ring
Time and then press # 5 1 between the
pseudo/double rings. If no one is on the
line, or if someone wants to send you a
fax, send the call back to the machine by
pressing l 5 1.
7
(Talk) or press
7
(Talk) on the
Telephone Services and External devices
Fax/Tel mode when the power
key is off
You can change the default setting of the
On/Off key to Fax Receive:On so that you
can receive faxes when the power key is off.
(See On/Off setting on page 18.)
Fax/Tel mode will work in the following ways.
When the machine is in Fax/Tel mode and
pseudo/double-rings to tell you to pick up
a voice call, you can only answer by
picking up the machine's handset or
cordless handset and pressing
(Talk).
If you answer before the machine
pseudo/double-rings, you can also pick up
the call at an external or extension phone.
7
7
41
Advertisement
Table of Contents
