Table of Contents
Advertisement
Smart Pro installation instructions
11. Specifications
Technical Specifications
Rated voltage range:
Rated frequency:
Rated power input:
Door opening:
Maximum Door Weight:
Door must be well balanced and able to be operated by
hand, as per warranty conditions and AS/NZS 4505:2012
Minimum headroom
Rated Operating Time
Rated Temp
Short Term Peak force:
Door travel speed (mm/sec)
Rated load
Nominal force
Receiver type
Receiver code storage capacity
Transmitter battery
Courtesy light
Network connectivity
* Gross door weight, including all fittings
Note: During the open and close cycles, intermittent operations may occur in areas which experience very strong
winds. The strong wind puts extra pressure on the door and tracks which may in turn intermittently trigger the safety
obstruction detection system.
Controll-A-Door
Smart Pro
®
SDO-9
230V - 240V
50Hz / 60Hz
225W
300kg*
57mm
4 mins
o
o
+5
C to +40
C
1400N
125mm
450N
200N (20kg)
Multi-frequency UHF
64 X 4-button Transmitters
CR2032 (3 Volts)
2 x LED (Light Emitting Diodes)
Network ready
(Smart hub already installed)
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Smart Pro and is the answer not in the manual?