Table of Contents
Advertisement
PCI Photon Twin 9
Configuring PCI Photon Twin 9 In Windows NT.
Microsoft Windows NT Provides built in support for 255
standard serial ports. To setup your PCI Photon Twin 9 serial card
you should follow these steps. Please note that to change any kind
of hardware configuration under Windows NT you must be logged
in as a user with Administrator level privileges, if you do not have
these please contact your system administrator.
Software Installation.
Insert the PCI Photon Twin 9 Card into your PC, as
described in chapter 2, and restart. Place the supplied HandyWEB
CDROM in a suitable drive and from the Start Menu choose Run
and enter <drive:>\Diskimg\ssnt\setup.exe (where <drive:> is the
path to the drive containing the installation disk).
Selecting the "OK" button begins the conventional
InstallShield setup process, there are no options for this
installation, all items must be installed in the NT System32
directory. Once the software has been installed, you may run the
Serial Solution applet by double clicking on it's icon from the
Control Panel.
InstallShield will then install the driver software
automatically - it will then copy the necessary files and start itself.
This automatically detects your new PCI serial card(s) and does
not require any further system restarting.
Software Installation
Chapter 3 Page 28
Advertisement
Table of Contents
