Problems - Brainboxes CC-313 Manual

PCI Quad / Lynx 8 Port RS232
Step 4 - Insert the PCI Serial Card.
STEP 5: The card connector should fit neatly through the slot's
aperture to the outside world. NB. Use the screw kept back from
the blanking cover to screw the PCI Serial card-retaining bracket
into the PC back panel housing.
STEP 6: Replace the cover.
STEP 7: The Multiport lead, provided with the PCI Multiport
RS232 card, fits easily over the connector and is held in place by
screw locks on the card connector.
STEP 8: Reattach all PC peripherals - mouse, keyboard, mains etc.
The PC should power on in the normal way.

Problems!

If the system fails to power up normally, check the following:
1. Ensure that the PC Serial card is installed correctly.
2. Ensure that other cards in the PC have not been upset.
3. Ensure that the power is connected and the PC is switched ON!
If all these have been checked and the PC still does not power up
then inspect the area surrounding the card to ensure that any
potentially harmful bits of metal etc. are not present. If the
problem persists, ask your dealer to check the card or contact the
HELP line as given on Intro. Page 2.
Insert the PCI Serial card in the slot. Be
careful to ensure that the gold plated PCB
fingers fits neatly into the expansion
connector. Press down firmly but evenly on
the top of the PCI Serial card.
Specifications
Chapter 2 Page 9