Problems - Brainboxes IE-340 User Manual

PC IEEE Reference
_________

Problems!

If the system fails to power up normally check the
following.
i.) Ensure that the PC IEEE 488 interface card is installed
correctly.
ii.) Ensure that other cards in the PC have not been upset.
iii.) Ensure that the power is connected and the PC is
switched ON!
iv.) Ensure that the IRQ jumper block is set correctly (default
NO IRQ).
v.) Ensure that the PC IEEE i/o address is set correctly
(default 0300h).
If all these have been checked and the PC still does not
power up the there is probably a conflict of i/o address between
the PC IEEE board and another board in the PC. Ask your
dealer to check this.
Page 24
Installation Guide.
Chapter 2