Deleting Ports In Windows; Restarting Windows; Warning; Chapter 3 Page 21 - Brainboxes CC-265 Hardware Manual

PCI Quad RS232
Baud Rate:
Data Bits:
Parity:
Stop Bits:
Flow:
Change the communications Settings in the COM Ports to
match the baud rate, parity settings etc. of the remote serial device.

Deleting Ports in Windows.

The Delete button can be used to discard the entries of
ports that have been removed from the system.
Note: Never try to leave out a serial port number when using the
delete button, because Windows may automatically shift serial port
numbers which results in a mis-match of settings in the Serial
Ports Applet (COM1-COM4 only).

Restarting Windows.

Whenever certain values have been entered or changed in the
hardware settings window, a message prompting to restart
Windows will appear. Only after having made ALL the necessary
changes restart Windows so that the new settings come into effect.

Warning

Due to the nature of 'Plug and Play', changes in system can lead to
changes in resources allocated to a 'P & P' device.
If you alter your system configuration in any way after installing
your PCI Quad RS232 card, you will need to run BBcards to verify
the resources allocated to that card.
9600
8
None
1.0
None:
Software Installation

Chapter 3 Page 21