Table of Contents
Advertisement
PCI VELOCITY / OPTO ISO RS422/485
Comtest.exe
Serial Solutions For Windows 3.x
Serial Solutions for Windows 3.x works with Windows 3.0,
3.1 and 3.11 as well as Windows For Workgroups 3.11.
Serial Solutions for Windows 3.x consists of the following
programs: -
Setup.exe
Port.DLL
BbLynx.drv
LynxAPI.dll
Term.exe
EasyCWIN
file I/O to ports. They contain many lines of
code and are thus harder to grasp. They
demonstrate in depth serial port programming
in a variety of languages but they are also
useful tools for using serial devices.
Comtest is a short but invaluable program that is
used to check that the serial port at a particular I/O
address is functioning correctly and is connected to
the particular IRQ line. The program correctly
identifies the UART type by employing the built in
loop back capability of the PC serial port chip, a
full test of the baud rate generator, transmitting and
receiving buffer, parity enable and start stop bit is
performed. There is no need for a second serial
port or a cable when using this utility.
The install routine for the package.
Enhanced
Control
configuration of extra serial ports from the
Windows Control Panel. Supports single as well
as multiport cards using shared interrupts.
Replacement for COMM.DRV.
Enhancement to the Windows Comms API's
allowing support for more than 9 ports.
Terminal program.
C source code, project files and ready to run.exe
program for an easy to understand Windows
terminal program. Learn how to write Windows
comms apps correctly the easy way.
Serial Solutions
Panel
applet.
Chapter 1 Page 3
Allows
Advertisement
Table of Contents
