Table of Contents
Advertisement
PCI DUAL RS232
Figure 2-6. Inserting The PC Serial Card.
STEP 7: The connectors should fit neatly through the slot's
aperture to the outside world.
STEP 8: Now replace the system unit's cover by carefully sliding it
down and back over the system unit. Replace the cover mounting
screws.
STEP 9: After attaching all the monitor and keyboard cables,
power up the PC. Do not forget the mains power cable! The PC
should then power on in the normal way.
Problems!
If the system fails to power up normally check the following:
i.)
Ensure that the PC Serial card is installed correctly.
ii.)
Ensure that other cards in the PC have not been upset.
iii.) Ensure that the power is connected and the PC is switched ON!
If all these have been checked and the PC still does not power up
then inspect the area surrounding the card to ensure that any
potentially harmful bits of metal etc. are not present, if the problem
persists ask your dealer to check the card or contact the HELP line
as given on Intro. page 2.
STEP 6: Now insert the PCI Serial card in
the slot. Be careful to ensure that the gold
plated PCB fingers fit neatly into the
expansion connector. Press down firmly
but evenly on the top of the PC Serial
card (Figure 2-6).
Specifications
Chapter 2 Page 11
Advertisement
Table of Contents
