Configuring Ports - Brainboxes CC-257 Hardware Manual

PCI DUAL RS232

Configuring Ports.

To view the settings of a port, select it and click on
settings, and then click on the resources tab:
Settings available in this window are:
1. Baud Rate - determines the baud rate at which the
selected port operates.
PCI Dual RS232 users: The maximum baud rate
available is 115,200.
PCI Velocity RS232: Users: the maximum value
available is 921,600 (1 Megabaud.) Note: Many
serial comms applications will not actually register
the ports as running at baud rates of above 115200.
2. Data Bits.
3. Parity.
4. Stop Bits.
5. Flow Control.
6. Advanced - see the section below, titled "Advanced
Port Settings."
Software Configuration
Change to suit remote device.
Chapter 3 Page 23