Table of Contents
Advertisement
Specifications
Hardware Installation.
STEP 1: Before the PC card can be installed the power to the PC
MUST be switched OFF, and the lead removed from the PC.
STEP 2: Remove the PC case.
Figure 2-4. Removing Blanking Cover
Figure 2-5. Installing The Printer Port Cable.
Step 4: (OPTIONAL, PCI Dual RS232 Users): Place the PCI
DUAL RS232 on a flat, even surface. Making sure that the inverted
triangle on the plug on the LPT lead aligns with the Pin#1 marking
on the printer header, press the plug down evenly and firmly, until
resistance is felt and it can be pushed no further - the port has been
plugged in. The LPT port is mounted on a bracket allowing it to be
placed in a spare PC aperture, next to the PCI card.
Chapter 2 Page 10
STEP 3: Choose an empty expansion slot.
Remove the blanking cover protecting the
slot on the PC back panel (Figure 2-4).
KEEP the blanking cover screw safely for
later.
PCI DUAL RS232
Advertisement
Table of Contents
