Hardware Installation - Brainboxes CC-324 User Manual

PCI 1 Port RS422/485

Hardware Installation.

STEP 1: Before the PC card can be installed the power to the PC
MUST be switched OFF, and to ensure extra safety, the power lead
removed from the PC.
STEP 2: Remove the PC case.
Step 3 - Removing Blanking Cover
Step 4 - Inserting The PCI Serial Card.
STEP 5: The connectors should fit neatly through the slot's aperture
to the outside world.
STEP 6: Now replace the system unit's cover by carefully sliding it
Choose an empty expansion slot. Remove
the blanking cover protecting the slot on
the PC back panel. KEEP the blanking
cover screw safely for later.
Now insert the PCI Serial card in the slot.
Be careful to ensure that the gold plated
PCB fingers fits neatly into the expansion
connector. Press down firmly but evenly
on the top of the PCI Serial card
Chapter 2 Page 14
Hardware Setup