User Guide
EC-LTS1200-410
Installation
Required tools
Mechanical installation
20 |
©
Danfoss | July 2021
Risk of electric shock during electrical installations. Use insulated tools..
Following tools are required to install the electric device:
•
Ratchet torque wrench.
•
Hex head wrench kit with different metric sizes.
•
Socket wrench kit with different metric sizes.
•
Cable gland tightening tool. Size according to cable glands.
•
Cable skinning knife.
•
Crimping tool for cable lugs.
For more detailed information, see appropriate Chapters in this user guide and product data sheets at
https://www.danfoss.com.
Allowed mounting position
Do not place the electric device on the ground without proper mounting or protective
structure.
•
The electric device must be mounted on a flat, heat- and flame-resistant mounting place (for example
on a bracket).
•
The electric device can be mounted in any direction. Mount the electric device permanently
from the mounting points.
•
Mounting points are shown in the Figure below.
Location of the mounting points
BC355449988603en-000201