Danfoss EC-LTS1200-410 User Manual page 29

User Guide
EC-LTS1200-410
Installation
© Danfoss | July 2021
Cutting the inner sheath
6. Make sure that the conducting strands of the cable are completely free of silicone and other impurities.
Place the cable inside the cable lug body, and crimp the cable lug twice in different places. See Figure
below.
Connecting cable lug
7. Cut piece of shrink tube and shrink it over the cable lug and braid screen as shown in Figure below.
This is done to keep the braid screen in place and for extra insulation.
The shrink tube must be specified for operating temperature range from -40 ºC to 150 ºC. Self
gluing shrink tube is recommended.
BC355449988603en-000201 | 29