Operation; Operation Conditions; Condition Monitoring During Operation - Danfoss EC-LTS1200-410 User Manual

User Guide
EC-LTS1200-410

Operation

Operation conditions

Condition monitoring during operation

34 | © Danfoss | July 2021
The electric device should be used for its intended purpose only and within limits specified by the
manufacturer, concerning:
•
Loading.
•
Cooling.
•
Service interval.
•
Ambient conditions such as temperature and moisture.
The electric device is designed for these conditions:
•
Maximum altitude 4000 m above sea level.
If the operation limits are exceeded and the electric device is damaged, please contact local Danfoss
representative.
Risk of permanent damage to the electric device. Use the electric device only in the ambient
conditions given in this user guide and in the data sheet.
Risk of permanent damage to the electric device. Use the electric device only if the technical
guidelines given in this user guide and in the data sheet are met.
Risk of permanent damage to the electric device. If you notice deviations from the normal
operation (for example: high temperatures or noise), stop the electric device. Find the reason
for the deviation and take action to repair the functionality of the electric device. Refer to
Chapter Troubleshooting
Temperature trip on the electric device is 155°C. Connect the three PT-100 temperature
sensors to the converter.
Monitor the electric device regularly during operation to make sure of reliable operation, to foresee
possible upcoming failures and to help to reach the designed lifetime of the product.
on page 39 for more information.
BC355449988603en-000201