Eaton ELC-CAENET Manual page 11

ELC Distributed I/O Adapters
BR#50 ~ BR#57: R TC Sett ings
Real-time clock (RTC) set-up. When BR#9 = 1, ELC-CAENET will stop to update the RTC
values to BR#10 ~ #16. Once the setup is completed, ELC-CAENET will set BR#9 to 0.
Allowed range for RTC: 1970/01/01 00:00:00 ~ 2037/12/31 23:59:59
BR#9
0 No action
1 RTC stops
2 RTC being set
4.5.3 External Input Contacts (RX)
RX# Attribute
0 ~ 255 R/W
Symbol "R" refers to ready only; "R/W" refers to read and write.
R X# 0 ~ #25 5: Ext er na l Inp ut Co ntact
The current state of the input points. The right-side extension interface on ELC-CAENET is
able to connect to ELC digital I/O modules. ELC-CAENET supports maximum 256 I/O points.
4.5.4 External Output Contacts (RY)
RY# Attribute
0 ~ 255 R/W
Symbol "R" refers to ready only; "R/W" refers to read and write.
RY#0 ~ #25 5: Ext er na l Out put Co ntact
The desired output point states. The right-side extension interface on ELC-CAENET is able
to connect to ELC digital I/O modules. ELC-CAENET supports maximum 256 I/O points.
4.5.5 Control Register for Extension Modules (RCR)
RCR# Attribute
0 ~ 49
50 ~ 99
100 ~ 149
150 ~ 199
200 ~ 249
250 ~ 299
80
Content
External input contact
Content
External output contact
Content
st
The 1 analog I/O
R/W
module
nd
The 2 analog I/O
R/W
module
rd
The 3 analog I/O
R/W
module
th
The 4 analog I/O
R/W
module
th
The 5 analog I/O
R/W
module
th
The 6 analog I/O
R/W
module
For More Information visit: www.eaton.com
Explanation
Input points on digital I/O module
Explanation
Output points on digital I/O module
Explanation
Control register for the 1
I/O module
Control register for the 2
I/O module
Control register for the 3
I/O module
Control register for the 4
I/O module
Control register for the 5
I/O module
Control register for the 6
I/O module
Default Latched
OFF NO
Default Latched
OFF NO
Default Latched
st
analog
-- NO
nd
analog
-- NO
rd
analog
-- NO
th
analog
-- NO
th
analog
-- NO
th
analog
-- NO
MN05002003E