Table of Contents
Advertisement
Programmable DC Power Supply 62000P Series Operating & Programming Manual
80V/300A
3.3.4
DISPLAY
DISPLAY setting has two options: (1) DISPLAY SELECTION and (2) READING
AVERAGE TIMES.
3.3.4.1 DISPLAY SELECTION
The setting of DISPLAY is to show the internal settings on the last line of MAIN PAGE for
easy identification without entering the setting page. There are five options available for
displaying on MAIN PAGE: (1) NONE, (2) V/I LIMIT, (3) V/I/P PROTECT, (4) V/I
SLEWRATE, (5) TTL VALUE.
1.
In Config setting page, press "
ENTER
2.
Press "
" to enter into DISPLAY SELECTION.
3.3.4.1.1 NONE
When this selection is set to NONE, the last line of MAIN PAGE will not show any message.
1.
Use "
", "
shows.
3-32
APG INPUT 5V/5V
(a)
Figure 3-49
4
" to display the screen as Figure 3-50 shows.
" keys to move the cursor to the column to be set as Figure 3-50
80V/300A
APG INPUT 10V/10V
(b)
Advertisement
Table of Contents
