Source Subsystem - Chroma 62000P Series Operating & Programming Manual

Return Parameter: <NR1>
Query Example:
Return Example:

5.6.2.3 SOURCE Subsystem

(1) SOURce:VOLTage
Description:
Syntax:
Parameter:
Example:
Query Syntax:
Return Parameter: <NRf+> [Unit Volt]
Query Example:
Return Example:
(2) SOURce:VOLTage:LIMit:{HIGH/LOW}
Description:
Syntax:
Parameter:
Example:
Query Syntax:
Return Parameter: <NRf+> [Unit Volt]
Query Example:
Return Example:
(3) SOURce:VOLTage:PROTect:{HIGH}
Description:
Syntax:
Parameter:
Example:
Query Syntax:
Return Parameter: <NRf+> [Unit Volt]
Query Example:
Return Example:
(4) SOURce:VOLTage:SLEW
Description:
CONF:APGV?
5V or 10V
It sets the output voltage.
SOURce:VOLTage <NRf+>[suffix]
SOURce:VOLTage <NRf+>[suffix]
Refer to individual spec for valid numeric range.
SOUR:VOLT 0.01
SOUR:VOLT 80.00 It sets the output voltage to 80.00 volt.
SOUR:VOLT?
SOUR:VOLT?
9.000000e1
It sets the output voltage range.
SOURce:VOLTage:LIMIT:HIGH <NRf+>[suffix]
SOURce:VOLTage:LIMIT:LOW <NRf+>[suffix]
Refer to individual spec for valid numeric range.
SOUR:VOLT:LIMIT:HIGH 60.0 It sets the output voltage range to
SOUR:VOLT:LIMIT:LOW 20.0 It sets the output voltage range to
SOUR:VOLT:LIMIT:HIGH?
SOUR:VOLT:LIMIT:LOW?
SOUR:VOLT:LIMIT:HIGH?
120.00
It sets the voltage range for over voltage protection.
SOURce:VOLTage:PROTect:HIGH <NRf+>[suffix]
Refer to individual spec for valid numeric range.
SOUR:VOLT:PROT:HIGH 60.0 It sets the high limit to 60V for
SOUR:VOLT:PROT:HIGH?
SOUR:VOLT:PROT:HIGH?
88.00
It sets the rising or falling slew rate (volt/ms) of output voltage.
It returns the status set.
It sets the output voltage to 0.01 volt.
It returns the voltage.
60V maximum.
20V minimum.
It returns the maximum range set
for voltage.
voltage output protection.
It returns the high limit of voltage
protection.
Remote Operation
5-11