Chapter 3 Operation; Operation; General Menu Operation; Menu Structure - ADTRAN TSU LT User Manual

Operation

Chapter 3
OPERATION
The TSU LT can be configured and controlled from either the local front panel or from a PC using the
T-Watch Management Software Program.

General Menu Operation

The TSU LT uses a multilevel menu structure containing both menu items and data fields. All menu
operations and data are displayed in the LCD window. The menu items are numbered and can be viewed
by using the Up and Down arrows. See Figure 3-1.
MAIN MENU
Menu flow is normally depicted from left to right. Arrows on the lower right of the screen indicate the
direction of additional menu items. At every level of the menu, pressing Cancel returns the system to the
previous menu level. Repeatedly pressing Cancel returns the system to the main menu.
The opening menu is the access point to all other operations. There are four main menu items:
2)C , 3)U
ONFIGURE TILITY
and access specific parameters. Each main item menu contains a complete menu diagram to identify the
location of each operation.

Menu Structure

The TSU LT uses hierarchical menus to access its many features. The main menu level (Figure 3-2 on
page 34) leads to submenus (see Figure 3-1). All menu operations are displayed in the LCD window. The
complete TSU LT menu diagram is shown in Appendix A on page 61.
61202060L4-1
1) STATUS
1) NETWORK (NI)
2) CONFIG 2) UNIT
3) PORT
3) UTIL
1) NETWORK TESTS
4) TEST 2) RUN SELFTEST
3) PORT TESTS

Figure 3-1. TSU LT Main Menus

and . Each main menu item has several functions and submenus to identify
, 4)T
EST
© 2002 ADTRAN, Inc.
1) NI PERF REPORTS
2) CURR ERR/ALM
3) ERR/ALM HIST
1) TIME/DAY
2) SOFTWARE REV
3) REINIT UNIT
4) ADDRESS
5) SET PASSCODE
6) FACT RESTORE
1)S ,
TATUS
33