Standard Web pages
5.4 Quick setup
5.4.2
Setup (G120X/G120XA converters only)
The setup Web page allows you to configure a more comprehensive range of settings to meet
the specific requirements of the G120X/G120XA converters. You can perform the following
setups:
• Quick setup for G120X/G120XA (Page 42)
• Application setup (Page 50)
• Free function blocks setup (for converter FW 1.03 or later) (Page 51)
Note
If the quick setup icon on the home page shows that you are currently still in classic quick
setup mode, you must first change the mode to quick setup for the G120X/G120XA
(Page 33).
5.4.2.1
Quick setup
The quick setup Web page allows you to set the following data for the connected
G120X/G120XA converter:
• Application
• Motor data
• I/O configuration
• Important parameters
• Motor identification
42
SINAMICS G120 Smart Access
Operating Instructions, 12/2020, A5E43332487-004