Configuring Wi-Fi - Siemens SINAMICS G120 Operating Instructions Manual

Standard Web pages
5.2 Optional settings page
5.2.1

Configuring Wi-Fi

If you do not want to use the factory default Wi-Fi settings, you can change Wi-Fi
configuration in the following dialog box:
The new Wi-Fi configuration takes effect only after the SINAMICS G120 Smart Access is
restarted.
Wi-Fi SSID (Service Set Identifier)
Default SSID: G120 smart access_xxxxxx ("xxxxxx" stands for the last six characters of the
MAC address of the SINAMICS G120 Smart Access)
Example SSID: G120 smart access_60c3e2
SSID character restrictions: maximum 20 characters which are limited to A-Z, a-z, 0-9, _, -, ~, !
, @, #, $, %, ^, &, *, and space. The first and the last character must not be a space.
Wi-Fi password
Default password: 12345678
For detailed information about the password requirements, see Section "Establishing the
wireless network connection (Page 17)".
26
SINAMICS G120 Smart Access
Operating Instructions, 12/2020, A5E43332487-004