8. Select the method which the converter uses to measure the data of the connected motor.
Depending on the selected application class and technological application, the available
methods for motor identification may vary:
– Inhibited: P1900 = 0
– Motor data identification and speed controller optimization: P1900 = 1
– Motor identification at standstill: P1900 = 2
If you choose to identify the motor data, go to the JOG page after you have finished
classic quick setup. For information about motor identification, see Section "JOG
(Page 78)".
9. Complete quick setup. You can select to go to the JOG page immediately or later.
SINAMICS G120 Smart Access
Operating Instructions, 12/2020, A5E43332487-004
Standard Web pages
5.4 Quick setup
41