Table of Contents
Advertisement
Mounting
5.4 Mounting without an adapter (wall mounting only)
5.4
Mounting without an adapter (wall mounting only)
Drilling template
Note
Installation location
The following should be noted with regard to the installation location:
• Devices with an internal antenna must be aligned according to the characteristics of the
internal antenna (refer to the technical specifications of the antenna --> Radiation pattern
diagrams). Since the internal antennas are integrated in the housing, the location and
alignment of the housing decides the radiation direction of the antennas.
• There are no restrictions relating to devices without internal antennas.
The location of the holes for mounting the SCALANCE W786 on a wall is shown in the
following figure:
Figure 5-4
22
Drilling template for wall mounting of the SCALANCE W786
Operating Instructions, 11/2014, A5E03678337-07
SCALANCE W786-x
Advertisement
Table of Contents
