Siemens SINAMICS G120 Operating Instructions Manual page 54

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Standard Web pages

5.4 Quick setup

3. Select the required free function blocks. A tick mark then appears on the lower right of the

selected free function blocks. The blue free function blocks indicate that you have previously

configured the inputs of the function blocks.

4. Select a target free function block to start editing. If any of the currently selected function

blocks is not the required block, click the reselect button on the lower left to go back to the

previous Web page for reselection of the required function blocks.

SINAMICS G120 Smart Access

Operating Instructions, 12/2020, A5E43332487-004

Table of Contents