Siemens SINAMICS G120 Operating Instructions Manual page 57

Hide thumbs Also See for SINAMICS G120:

Table of Contents

6. Assign the free function blocks to the applicable runtime groups and define a run sequence

within a runtime group. Confirm the settings to activate the free function blocks. To reset

the free function block settings to the factory settings, click the reset button on the lower

left.

Note

None of the free function blocks in the converter are active in the factory settings. To

activate a free function block, you must assign it to a runtime group with an exception of

runtime group 9999.

7. Follow the instructions from Step 4 to Step 6 to complete editing of other target free

function blocks.

Further information

For more information about the free function blocks, see the SINAMICS G120X/XA Operating

Instructions (Page 105).

SINAMICS G120 Smart Access

Operating Instructions, 12/2020, A5E43332487-004

Standard Web pages

5.4 Quick setup

Table of Contents