Siemens SINAMICS G120 Operating Instructions Manual page 65

8. Select a desired motor data identification method.
Depending on the configuration type and selected application, the available methods for
motor identification may vary:
– Inhibited: P1900 = 0
– Motor data identification and speed controller optimization: P1900 = 1
– Motor identification at standstill: P1900 = 2
If you choose to identify the motor data, go to the JOG page after you have finished quick
setup. For more information about motor identification, see Section "JOG (Page 78)".
9. Complete quick setup.
SINAMICS G120 Smart Access
Operating Instructions, 12/2020, A5E43332487-004
Standard Web pages
5.4 Quick setup
63