System Test Mode - Sega OUTRUN 2 SPECIAL TOURS SDX Service Manual

- SYSTEM TEST MODE

• The details of changes to Test Mode settings are saved when you exit from Test
Mode by selecting EXIT from the system Test Mode menu. Be careful because if
the power is turned off before that point, changes to the settings will be lost.
• Use with the specified settings. If settings other than those specified are used,
inappropriate operations or malfunction may occur.
In the System Test Mode, the main activities include checking LINDBERGH information and actions and the setting
of coin/credit. Also, a screen appears for checking screen adjustments. For details, see the LINDBERGH service
manual, which is provided separately.
Use the following settings with this product. If the settings are not as specified, error messages might appear and
operations might not be normal.
COIN ASSIGNMENTS
COIN CHUTE TYPE: COMMON
SERVICE TYPE: COMMON
NETWORK SETTING
NETWORK TYPE: MAIN
MAIN NETWORK: SETTING NOT REQUIRED
1
When the TEST Button is pressed, the System Test Menu Screen (SYSTEM TEST MENU) appears.
2
Use the SERVICE Button to move the cursor to the desired test item.
3
Press the TEST Button to confirm selection of the item.
4
When testing and checking are completed, select EXIT and press the TEST Button. The System Test Menu
Screen reappears.
5
When all tests are completed, select EXIT and press the TEST Button. The game screen reappears.
FIG. 3-2 System Test Menu Screen
SYSTEM TEST MENU
SYSTEM INFORMATION
STORAGE INFORMATION
JVS TEST
MONITOR TEST
SPEAKER TEST
COIN ASSIGNMENTS
CLOCK SETTING
NETWORK SETTING
GAME TEST MODE
-> EXIT
SELECT WITH SERVICE AND PRESS TEST