Calibration Setting - Sega OUTRUN 2 SPECIAL TOURS SDX Service Manual

F. CALIBRATION SETTING
The screen allows you to adjust and confirm the status of the left/right steering wheels, left/right gas pedals, and
left/right brake pedals. Periodicially use this screen to confirm that each setting is appropriate. Also, when replacing
the volume, use this screen to make adjustments.
FIG. 3-3fa Calibration Setting Menu Screen
SETTING HANDLE:
Choose LEFT or RIGHT to select the seat for calibrations by side of the ride.
SETTING CONTENTS:
- CENTER OF STEER (Steering center value)
- MINIMUM GAS (Gas pedal lowest value)
- MAXIMUM GAS (Gas pedal highest value)
- MINIMUM BRAKE (Brake pedal lowest value)
- MAXIMUM BRAKE (Brake pedal highest value)
Can be chosen.
The above screen allows the left and right steering wheels to be adjusted.
Move the cursor to SETTING HANDLE, and switch between LEFT and RIGHT with the TEST Button. This allows
you to select which side you would like to adjust.
INPUT STEERING VALUE:
Turning the steering wheel causes the ▼ to move left and right, displaying the actual steering input value (000 to
255). You can decide on a position that matches the steering wheel being in the center.
CENTER OF STEER:
This item decides on a center position for the steering wheel. Visually align the steering wheel so it is centered.
Next, move the ▲ so it lines up with the ▼by moving the cursor to RIGHT or LEFT and pressing the TEST Button.
Decide on a center value for the steering by moving to the right with RIGHT, or LEFT with left. The settings will be
applied when you move to a different item.
CALIBRATION SETTING MENU
INPUT STEERING VALUE ***
CENTER OF STEER ***
SETTING HANDLE
SETTING CONTENTS CENTER OF STEER
RIGHT
LEFT
-> EXIT
SELECT WITH SERVICE AND PRESS TEST
LEFT