System Test Mode - Sega OUTRUN 2 SPECIAL TOURS DELUXE Service Manual

- SYSTEM TEST MODE

• The details of changes to Test Mode settings are saved when you exit from Test
Mode by selecting EXIT from the system Test Mode menu. Be careful because if
the power is turned off before that point, changes to the settings will be lost.
• Use with the specified settings. If settings other than those specified are used,
inappropriate operations or malfunction may occur.
In the System Test Mode, the main activities include checking LINDBERGH information and actions and the setting
of coin/credit. Also, a screen appears for checking screen adjustments. For details, see the LINDBERGH service
manual, which is provided separately.
Use the following settings with this product. If the settings are not as specified, error messages might appear and
operations might not be normal.
COIN ASSIGNMENTS
COIN CHUTE TYPE:
SERVICE TYPE:
OutRun Special Tours DX Coin Setting Guide
This coin setting guide explains, through examples, how to establish fee settings for a "1 Player Game 300 Yen", "2
Player Game 500 Yen", and "15-Continous Course Mode Disabled", etc.
Refer to these examples and adjust coin settings as suitable for the installation location.
Step 1
On the COIN ASSIGNMENTS Screen, adjust settings just as is shown in FIG. 3-2a.
����� ������������� ����� �������������
����� �HU�� �YP�
��RV��� �YP�
����� �HU�� #1 ����� �� �R�D�� R���
1 �����(�) ��U��� �� 1 �R�D��(�)
����� �HU�� #2 ����� �� �R�D�� R���
1 �����(�) ��U��� �� 5 �R�D��(�)
-> D����L ��������
���� ���� ��������
�X��
��L��� W��H ��RV��� ���D PR��� ����
FIG. 3-2a COIN ASSIGNMENTS Screen
COMMON
COMMON
�������
�������
�he #1 coin chute is set for ¥100 coins.
�he #2 coin chute is set for ¥500 coins.