Repeaters Programming - Baofeng BF-H6 Series User Manual

d. [MENU] [1][3] [MENU] 123.0 [MENU] [BACK]
e. Enter RX frequency (Ex. 43255000)
f. [MENU] [2][6] [MENU] [1][0] [MENU]
-->>[BACK]
g. Enter TX frequency (Ex. 43755000)
h. [MENU] [2][6] [MENU] [1][0] [MENU]
-->> [BACK]
i. Press [VFO/MR] key to the MR mode and the channel number will reappear.
Ex 2. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 10:
RX = 432.6625 MHz
TX CTCSS tone 123.0
a. Press the [BACK] button to switch between menus.
b. Press [VFO/MR] key to VFO mode, and the channel number on the right will disappear.
c. [MENU] [2][7][MENU] [1] [0] [MENU] [BACK]
d. [MENU] [1][3] [MENU] 123.0 [MENU] [BACK]
-->>Use [BACK] to select Upper display
e. Enter RX frequency (Ex. 43266250)
f. [MENU] [2][6] [MENU] [1][0] [MENU]
-->> [BACK]
g. Press [VFO/MR] key to the MR mode and the channel number will reappear.

6.11 Repeaters Programming

The following instructions assume that you know what transmit and receive frequencies your repeater employs, and that
you're authorized to use it.
a. Press the [VFO/MR] key to VFO mode, and the channel number on the right will disappear.
b. Use the numeric keypad to enter the repeater's output (your receiving) frequency.
Selects desired TX encode tone
Enter the desired channel (Ex 10)
RX has been added
Enter the same channel (Ex 10)
TX has been added
Deletes Prior Data in channel (Ex. 10)
Select desired TX encode tone (Ex 123 CTCSS)
Enter the desired channel (Ex 10)
Channel has been added
20