• [A/B] (appears on the display): push to select the desired frequency (VHF or UHF) in the main or secondary display.
• Numeric keypad
With these keys you can input the information or
your selections on the radio. In tx mode, push
the number keys to send a corresponding DTMF
code.
• *
Key
A short momentary press of the key enables the reverse function.
If you press this button for more than 2 seconds you will lock/unlock the keypad.
• Zero 0 Key
The POFUNG H6 features a battery voltage meter that the current voltage of the battery on the display.
To see the voltage displayed, press and hold the [0] key for about two seconds.
#
key
•
If you press shortly [#] you will switch to High / Low output power.
When listening to broadcast FM a momentary press will start the scanning. Scanning in broadcast FM will stop as soon as
an active station is found, regardless of scanner resume method.
To enable the scanner, press and hold the [#] key for about two seconds.
14