Status Indica�Ons; Main Keypad Controls - Baofeng BF-H6 Series User Manual

13/17. Depending on the setting, it will show the frequency in use, the channel name, the menu setting, etc
14/15. Indicates the VFO in use and the current menu or function setting. This icon is displayed close to the band in use or
to the menu settings.
16/18. Indicates the channel number that you stored
Battery Level Indicator
When the battery level indicator reads the battery is depleted. At this point the radio will start beeping periodically
as well as flash the backlight of the display and when voice prompts are enabled, a "Low Voltage" announcement will be
heard, indicating that you need to change your battery or put your radio in the charger.
4.3 Status Indications
The status LED has a very simple and traditional design.
LED Indicator Radio Status
Constant Red Transmitting.
Constant Green Receiving.

4.4 Main keypad controls

• [MENU] key: It is used for activating the MENU, choose each MENU selection and confirm the parameter.
• [VFO/MR] key: press the key to switch between frequency (VFO) mode and channel (MR) mode.
To save frequencies to channel memory you must be in Frequency (VFO) mode. Memory mode is sometimes also referred
to as Channel mode.
• ▲ key: Press it for more than 2 seconds, the channel and frequency will move upwards rapidly; in SCAN mode, press this
control to move the scanning upwards.
• ▼ key: Keep it pressed it for more than 2 seconds, the channel and frequency will move downwards rapidly; in SCAN
mode, press this control to move the scanning downwards.
• [BACK] key: press to exit the Menu and functions.
13