000Hz, 1450Hz, 1750Hz Tone-Burst; Manual Programming (Channels Memory) - Baofeng BF-H6 Series User Manual

signal will automatically switch to the frequency or channel mode for normal transmitting and receiving.
When the signal disappears the radio will automatically switch again to FM radio mode.
6.9 TX 1000Hz, 1450Hz, 1750Hz, 2100Hz repeaters tone
Press [PTT] + [SK2] to send 1750Hz repeaters tone. This function is useful for communications through repeaters.
If you have the keypad lock enabled on your radio, you can still send a 1750Hz tone the regular way without having to
unlock your radio.

6.10 Manual Programming (Channels Memory)

Memory channels are an easy way to store commonly used frequencies so that they can easily be retrieved at a later date.
The POFUNG H6 features 128 memory channels that each can hold: Receive and transmit frequencies, group signaling
information, ANI/ PTT-ID settings and a seven character alphanumeric identifier or channel name
Frequency Mode vs. Channel Mode
In standby mode, press [VFO/MR] key to switch between frequency (VFO) mode and channel (MR) mode.
These two modes have different functions and are often confused.
Frequency Mode (VFO) : Used for a temporary frequency assignment, such as a test frequency or quick field programming
if permitted.
Channel Mode (MR) : Used for selecting preprogrammed channels.
Ex 1. Programming a Channel Repeater Offset with CTCSS Tone
EXAMPLE New memory in Channel 10:
RX = 432.55000 MHz
TX = 437.55000 MHz (This is a (+ 5) Offset)
TX CTCSS tone 123.0
a. Press the [BACK] button to switch between menus.
b. Press [VFO/MR] key to VFO mode, and the channel number on the right will disappear.
c. [MENU][2][7][MENU] [1] [0] [MENU] [BACK] Deletes Prior Data in channel (Ex. 10)
19
1 .