Cursor▼▲Conversion (A/B); High/Low Power Fast Selec�On; Keypad Lock - Baofeng BF-H6 Series User Manual

a. In standby mode, press [MENU] [3][0]; the display will show "Scan DCS".
b. Press [MENU] and the scan of DCS codes will start.
NOTES: The function cannot be activated when the radio is set in Channel mode. The Scan will start only when the
receiving band will detect a signal.
6.5 Cursor▼▲Conversion (A/B)
Directly press [A/B] key to move the cursor up and down. Then, you can modify or confirm the parameters indicated by the
cursor.
Important1: H6 has a dual-frequency display function. In frequency mode, you will see on the display two different
receiving and transmitting frequencies; while in channel mode the two different channels will be displayed.
Important2: In frequency or channel mode, press the [A/B] key to shift between the main channel A and the sub-channel B
▲ on the display indicates on which channel (main channel A or sub channel B) you are operating.
▼ is displayed next to the channel.
6.6 High/low power fast selection
In channel mode, press [#] key to shift between High/ Low power.

6.7 Keypad lock

To avoid accidentally changing the radio setting, press the [* ] button for 2 seconds. The
icon will appear on the
display. PTT, MONITOR, and LAMP buttons will still be active. Repeat the same procedure to unlock the keypad.
6.8 FM Radio (FM)
The frequency range to listen to the radio is 85-108MHz.
a. In frequency or channel mode, Press [SK1] to turn on the radio.
b. Select the desired radio frequency with the ▲/▼ keys or input the frequency. Or
• Press [#] to automatically search a radio station.
c. Press [SK1] to exit FM radio.
Note: while you are listening to the radio, the frequency or channel of A / B receiving
18